Bricks Masonry And The Bonding Part
The use of brick masonry in Los Angeles is getting more popular by the day and the concept is about forming a bonding of bricks with mortar. If you consider permanent building construction, cement or lime mortars are used. However, if it is about temporary sheds, mud mortar is used.
Brick masonry work is preferred over stone masonry and there are reasons for it. The range of bond types certainly makes it popular amongst users and if you have a project to execute, you can try it out.
There will be execution challenges to meet for your project and for that, you can look to use our services. We will guide you on the varied bonds and meet your expectations for project execution.
Why Prefer Brick Masonry Over Stone Masonry?
The other option is stone masonry but there are reasons why you would want to use bricks. Here are the details for readers in brief.
| Easy handling | The bricks are lightweight and that makes them easy to handle. |
| Easy to source | Bricks are easy to source and the transportation costs should be negligible. Stones will have to be sourced from quarries |
| Thinner walls | Are you planning to construct a thin wall? You will only have to use bricks and not stones. |
Understand The Varied Bond Types For Bricks:
We have spoken about a variety of bonding types and here are the details for anyone interested.
Stretcher Bond
Stretcher can be defined as the longer face of brick as observed in elevation. If the brick has a dimension of 190mm by 90mm by 90mm, the 190mm by 90mm face is considered the stretcher. So, when opting for stretcher bond masonry, every brick is arranged in stretcher courses. But that said, efforts must be taken to break the vertical joints. If you are constructing the half brick thickness-based partition walls, this is the type to consider.
English Bond
English bond is regarded as the strongest of all the bonds available. This is the most commonly used bond for walls of varied thicknesses. To break the continuity of vertical joints, the brick is cut into two halves. Then, each of the halves is used at the beginning and end of the wall post the first header. This is commonly referred to as Queen Closer.
Header Bond
Headers can be identified as the brick’s shorter face when marked in elevation. If the dimensions are measured, the measurement in a stand brick for the header will be 90mm by 90mm face. If going for header bond brick masonry, the bricks are arranged in header courses. Such bonds are perfectly apt for single brick thick wall construction.
Flemish Bond
When using the Flemish bond, all the courses comprised of alternate stretcher and header. All the alternative courses available will start with a header and stretcher. When it is time to break those vertical joints, the queen closers will be essentially required. This is true only if the course starts with the header. Each header is supported centrally on a stretcher below the same. There is the scope to try out two types of such bonds and here are the details.
- Double Flemish Bond
- Single Flemish Bond
When opting for double bond, the wall’s faces will have a sort of Flemish look. The course will certainly comprise a stretcher and header. Similarly, when opting for a single bond, the inner face will have an English bond while the outer wall face will feature a certain kind of flemish look.
It must be understood that the construction of Flemish bonds requires an extreme level of skill. It offers an extremely pleasing appearance. However, it may not be the toughest and strongest compared to the English bond. This type of Flemish bond promises a perfectly strong aesthetic view.
Executing Your Project Flawlessly
As experienced paving company in Los Angeles, we stand committed to your project. We will guide you on the process of bond choice and then execute the project as per your specifications. You are welcome to contact us at Brooks Stone for such type of work.